If you have additional questions about storing your Switch pontoon on a boatlift, your Sea-Doo dealer is standing by to help provide answers to find the perfect solution. 19- and 21-Foot Models: Center bunks 132 inches (335.3 cm), Outer bunks 156 inches (396.2 cm) Let’s start with the pricing and basic features for each model. The 2022 Sea-Doo Switch range comes with three models to suit your needs and your budget. 16- and 18-Foot Models: Center bunks 108 inches (274.3 cm), Outer bunks 120 inches (304.8 cm) The Sea-Doo 2022 Switch Model Overview and Pricing. Although jet drives are very inefficient they are safer in terms of not having an exposed propeller spinning where swimmers could make contact with. The Switch is a very plasticky, modular looking tri-toon boat powered by a Rotax engine and jet drive. Its also good to know that these machines require a water. Compact Models: Center bunks 72 inches (182.9 cm), Outer bunks 84 inches (213.4 cm) When you look at the latest Sea-Doo creation, the Switch, you’ll understand why very quickly. The draft of Sea-Doo Switch boats varies between 13.6 inches and 19.3 inches depending on the model. The minimum requirements are outlined below. The recommended lift bunk length varies by model. The distance between the inner bunks is 22.75 inches (57.8 cm). The distance between the inside of the two outer bunks should be set at 72.5 inches (184.2 cm). The bunks for the center hull should be set 7.3 inches (18.6 cm) lower than the outer bunks.
If you’re looking for a quick reference for bunk lengths and angles, your Switch trailer is a great place to start. The proper Switch lift setup will support both the sides and the center hull.
SEA DOO SWITCH DRAFT FULL
You’ll want to make sure the lift is certified for the appropriate amount of weight for your Switch, any accessories on board, and don’t forget to factor in a full tank of fuel (1 gallon of fuel is approximately 6 lb.) and any people that may board while it’s parked on the lift. If you want to keep your pontoon on the water, the recommended lift setup for a Switch is similar to those used for a tri-hull pontoon with two sets of 5.5-inch-wide (14 cm) carpeted bunks. It’s always recommended to store your Switch out of the water in order to preserve it for many years of enjoyment. One common inquiry: What type of boatlift do you need for a Sea-Doo Switch? While the Switch certainly is a fresh new take on a pontoon with some amazing new adventures on the horizon, it raises some fresh questions. It’s true, there’s nothing else quite like Sea-Doo Switch pontoons.
0 kommentar(er)
